Digital Testing Machine

• This is motorized machine having automatic loading/unloading cycle suitable for production testing.
• The machine body is having a taper front look and large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine looks like new over years.
• The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accuracy is retained for years together due to hardened bush.
• A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
• An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia.
• These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy.

• Loading Accuracy as high as + 1%
• Suitable at variable speeds to suit a wide range of materials.
• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• High reading accuracy due to large size and design of dial.
• Wide range of standard and special accessories, including load stabilizer.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for easy of operation.
• Robust staining frame of an extremely rigid construction.
• Safe operation ensured be means of safety devices.
• Fully enclosed and protected pendulum.
• Load Capacity : 100 kN, 200kN, 400kN, 600kN, 1000kN.

• Loading accuracy as high as ± 1%
• Straining at variable speeds to suit a wide range of materials.
• Windows based touch screen control panel with printing connectivity.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• Wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safely devices.
• Fully enclosed and protected pressure transducer.
• Manual control & release valve operation.
• Load Capacity:100 kN, 200 kN, 400 kN, 600 kN,1000 kN,1200 kN, 1500 kN and 2000 kN.

Micro Controller based panel incorporating state of art technology with following features- 
• Front panel touch screen display
• Data entry of test parameters including pre-load, rupture %, Safe Load & Specimen data etc.
• Online graph of load Vs Displacement directly on screen.
• USB Printer port for printer interface with graph & result print out.
• Facility to export the result/ Data to PDF, EXCEL & CSV formats.
• Windows based software available for Online graph on PC, Data analysis, Statistics, Point tracing, superimposing graphs to compare With standard, zooming graph etc.

• Features
• Loading accuracy as high as ± 1%
• Servo controlled Motorized Valve incorporating of control modes - Standard manual control, Potentiometric control, Load rate control, Elongation rate control, Load hold mode, Auto start & initial valve open start.
• Straining at variable speeds to suit a wide range of materials.Printer & PC graphs enable study the behavior of the material.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port for PC control of Machine.
• Load Capacity : 100 kN, 200 kN, 400 kN, 600 kN & 1000 kN.

• Machine designed with a hydraulic power pack and control circuit for effortless loading and unloading operation.
• A dial gauge in frount measure depth of ball penetration.
• this facilitates production testing within tolerance limits by compression method.

The D 2.1 is an advanced pocket sized hardness tester distinguished by its high accuracy, wide measuring range, simplicity of operation & above all, its portability. It runs on two AA Batteries. It is suitable for testing the hardness of a large number of materials & finds applications for hardness testing in many areas of industry.

The Impact Type Portable Hardness Tester: The impact type portable hardness tester is designed for testing metallic materials, the hardness of which ranges from very low to very high values. Hardness testing can be performed directly on- site & in any position. Typical applications for this Impact type of hardness tester are large, heavy work pieces, which are difficult to access. It is especially suitable for applications in which static testing is not feasible or not economical.

Typical Field of Application-

Ø  Hardness testing of mass-produced parts during manufacturing operation.

Ø  Hardness tests on installed machines or steel structures.

Ø  Rapid testing of multiple measuring areas for examining hardness variations over large regions.

Ø  Control measurement for rapid determination of a specific thermal treatment result, e.g. annealed or quenched & tempered.

Features of our Portable Hardness Tester Model D 2.1

      Display of hardness in various conventional scales of hardness.

      Compensation for the angle of probe with respect to vertical while testing.

      Immediate conversion between available conventional scales of hardness.

      Average result of up to nine readings can be taken with the standard deviation.

      The readings can be saved for later viewing, the max capacity being 500 readings. The readings are stored serially with the serial number being displayed. There is a batch number facility as well to distinguish the readings from batch to batch. The entire batch readings can be cleared or the batch number can be reset using specific keys.

Ø  Serial port (RS 232) or printer port (Centronics Compatible) is available at extra price.

Ø  5 Different Probes available according to application at extra price